Archive for July, 2010

Blade400: B-Check

Friday, July 16th, 2010

Ca 1 x pro Jahr passiert es , dass eine Kugelpfanne vom “Flybar Paddle Control Frame Rod” abrutscht. Mir war in den letzten Tagen schon aufgefallen dass sie sehr locker sitzen. Heute ist eine im Flug abgerutscht. Man merkt es kaum, das Loch umschliesst ja weiterhin die Stange. Man hat dann einfach sehr viel Spiel an dieser Stelle. Aber so kann es natürlich nicht bleiben, also habe ich zuhause den Paddelrahmen geöffnet und an den beiden Stangen alle 4 Kugenpfannen erneuert. Wo ich schonmal dran war habe ich den Rotorkopf von der Rotorwelle genommen und dann Welle, Taumelscheibe(Kugel!) und Pitchslider gereinigt damit es wieder schön leichtgängig ist.
Alles wieder zusammengebaut, Pitch gemessen und per Swash-Mix um 6% erhöht, jetzt habe ich -11° bis +11°.
Swash-Mix aktuell:
AILE: -60
ELEV: -60
PITCH: +106

Mit dem T-Rex 250 heute “Motor aus, 2 Sekunden gleiten, Motor an” gespielt und weiter Rücken-Nasen geübt. Noch nicht länger als 12 s am Stück, aber ich werde immer entspannter dabei.

hot hot hot

Monday, July 12th, 2010

31°C in der Wohnung – schnell ‘raus hier.
Samstag flog ich nicht viel: Nachmittags 1 kleiner Akku und abends 2 kleine und einen Großen. Ich hatte ein nettes Gespräch mit crazy tom und durfte ihn auch fliegen sehen (mit microbeast). Er gab mir Tipps zu HELI-X und vorbereitende Übungen zu Piroflips. Hatte ich auch schonmal irgendwo gelesen (ich glaub von Uwe Caspart)
TODO:
* Mindestens 5 fach Looping auf mich zu – gerade, gleiche Lage, gleiche Größe.
* dann halbe Piro im oberen Scheitelpunkt
* dann halbe Piro oben und unten
* dann viertel? piro oben unten und an den seiten.
-> piroloop
* weniger pitch , Kreis enger machen -> piroflip

Die 5-fach Loops kann ich schonmal real üben. Gestern gelang mir 3fach. Loop+piru ist eher ein Thema für den Simulator.

Sonntag flog ich 2 x Nuri/Zagi mit Cam um die Windräder herum und auch sehr hoch – schönes Video! 3 x mit dem kleinen Heli – weiter Rücken-Nasenschweben geübt und ein mal den Großen – Batterie-Adapter vergessen – also nur 1 von 4 großen Akkus nutzbar.

Im Sim geht es so langsam Richtung Rücken-Rundflug und Rücken-Kreise.

10 Sekunden Rücken-Nasenschweben

Friday, July 9th, 2010

Heute war ein super Flugtag. 32°C, Sonne, ein paar Wolken, kaum Wind.
Ich flog heute 9 Akkus mit dem Kleinen und 4 mit dem Großen. Nachmittags im Garten mit dem Kleinen Basics trainiert: schweben und pirouettieren über 3 Punkten und Kreise: langsam, schneller, enger , Nase nach innen, Nase nach außen, rückwärts. 8 Minuten pro Akku wegen niedriger Drehzahl.

Abends erst mit dem Großen 4 Akkus: Loops und Rollen schon ziemlich sauber und fast zentriert. Auch ein paar Sekunden Nose-In inverted. Danach mit dem Kleinen Flips, schnelle Kreise und “natürlich” Nose-In inverted weiter geübt. Bin schon etwas entspannter dabei. 10 Sekunden schaffe ich schon. Wie immer, wenn man was neues lernt: man kümmert sich um Roll und Nick, dann vergisst man die Höhe zu halten – Heli steigt weg. Oder man achtet auf die Höhe, dann vernachlässigt man Roll & Nick. Bei dem ganzen inverted Kram steuere ich fast nie das Heck. Das macht das Gyro bisher sehr gut.

Blade400: ein paar Veränderungen

Wednesday, July 7th, 2010

Habe beim ebay-Händler “abeyerr” eine gelb-schwarze GF-Haube gekauft. Die Haube war in dem Karton nicht gut geschützt und etwas verbeult. Habe den Händler darüber informiert und er schickte mir eine weitere Haube gratis. Diese war genauso schlecht verpackt und war noch mehr verformt. Der Versand als Brief/Päckchen(?) war super schnell. Donnerstag losgeschickt, Mittwoch angekommen!!! Chinesischer Poststempel: 3.7. , bei mir angekommen: 7.7. Bei der 2ten Haube kein deutscher Zoll-Stempel oder Aufkleber.
Haube Nr.1 ist benutzbar, ich werde sie heute mal testfliegen. 23g statt 31g bei der Copter-X “unkaputtbar” Plastik-Haube.

Am Heck gibt’s auch eine Änderung: Die ausgefransten Heckblätter habe ich durch neue ersetzt. Die neuen sind ein paar mm länger. Bin sehr gespannt, wie sich das fliegt. Damit ich die nicht bei der ersten Landung schon wieder vermacke musste ich dringend die Heckfinne verlängern. Ich habe die Original Finne gegen die Alu-Finne vom Copter-X getauscht. Jetzt hat der Heckrotor 1,5cm Bodenfreiheit.

Die Testflüge heute waren erfolgreich. 8 Akkus waren schnell verflogen. Die Änderungen am T-Rex250 (Servo-Gestänge, Trim, Subtrim) sind kaum spürbar. Vielleicht ein Hauch weniger negativ Pitch als vorher. Sideflips nach links habe ich heute nicht probiert. Keine merklichen Fortschritte beim inverted Nasenschweben. Sobald ich das Heck ein wenig drehe, bin ich verunsichert und mache Fehler oder breche ab. Am Sim klappt das schon viel besser. Was inzwischen real gut klappt, sind Seiten-Rainbows hin-zurück-hin-zurück.
Blade400: Die gelbe Haube sieht schön aus, die weiße ist aber in großer Entfernung besser zu sehen, weil sie größer ist und mehr weiß und weniger schwarz enthält.
Die Alu Heckfinne macht einen stabilen Eindruck, schwingt nicht und gibt das gute Gefühl, den Heckrotor besser zu schützen.
Die neuen Heckblätter sind auch o.k. – Hab am Gyro noch nichts verändert – es driftet manchmal 🙁 Größere Heckblätter ergeben theoretisch einen geringeren Vorlauf (Heck Pitch). Wahrscheinlich müsste ich den Vorlauf auch immer anpassen wenn ich zwischen schweren und leichten Hauptrotorblättern wechsle.
Aktuelle Gaskurve Blade400(Stunt): 90 85 80 85 90

InsideHeli – all shows until now

Monday, July 5th, 2010

InsideHeli #92 – Bert Kammerer talks about the T-Rex 550 and more!

This week Chris and James talk to Bert Kammerer about the new T-Rex 550, and get his insight into flybarless vs flybar, electric vs nitro, and more fun stuff. Tune in! Stuff We Talked About: Protos sale at ElektroRC Align T-Rex 550

InsideHeli #91 – XFC, Wasps, and Road Trips

This week Chris and James talk about XFC results, Chris’ road trip, and James’ close encounter with a wasp. Tune in! Stuff We Talked About: GAUI X5 at HeliDirect 2010 XFC Coverage at AllMyRC.com
DATE: Sun, 06 Jun 2010

InsideHeli #90 – Fun Flying and Such

This week Chris and James talk about the Fun Fly events they both attended, and discuss the Century Radikal blade grip replacement announcement. James finds his next radio, and Chris admits he likes an Align heli. Tune in! Stuff We Talked About: Manifold Destiny cookbook Kevin Morris’ BVRC Fly-In Photos Richardson RC Club Episode 90 Picasa Album
DATE: Sun, 23 May 2010

InsideHeli #89 – Ramble On

This week Chris and James talk about, well, not much. Chris talks about the Protos canopy mold project, James’ Radikal is fueled by Jack, and other nonsense. Tune in! Stuff We Talked About: Episode 89’s Picasa Album SweetRC.com No Brainer EPP 3D planeRave F3C thread 1 (AllMyRC.com) Rave F3C thread 2 (AllMyRC.com)
DATE: Sun, 16 May 2010

InsideHeli #88 – Bee Stings and Flying Things

Join Chris and James as they dip into the listener email bucket, talk about new products, and listen to James get stung by a bee. Tune in! PS: I apologize for the garbled audio partway through… As a result, please accept this 50% discount off the regular price of the show. 😉 Stuff We Talked About: Bert Flying the T-Rex 700E RC Heli Nation Podcast Solid G and Hyperion Tail Servo (AllMyRC thread) 3 Year Old Heli Pilot (YouTube) 6 Year Old Heli Pilot (YouTube)
DATE: Mon, 03 May 2010

InsideHeli #87 – Skookum SK720: Interview with Art

This week Chris and James talk with Art from Skookum Robotics, and get him to spill the beans about the new SK720 Flybarless System. There’s also discussion of a sad heli-related injury and donation fund. Tune in! Stuff We Talked About: Skookum Robotics Skookum Support Forum (HeliFreak.com) Maresa’s Donation Fund Thread (HeliFreak.com)
DATE: Sun, 18 Apr 2010

InsideHeli #86 – Fun Fun Flying

This week Chris and James talk about the ARCA Fun Fly, and dip into the listener email bucket too. Tune in! Stuff We Talked About: Austin Fun Fly
DATE: Mon, 12 Apr 2010

InsideHeli #85 – Much Ado About Nothing

This week Chris and James play a little catch up and talk about things to come.Stuff We Talked About:Skookum 720 releaseDigital Angle FinderSwift NX releaseParkzone HabuAustin Fun Fly

InsideHeli #84 – Lipo Fire and TriCopters

James and Chris pull show material from listener email and discuss the questions. Chris babbles on about a new toy he wants to build, and James remains indifferent. Tune in! Stuff We Talked About: Lipo fire story (HeliFreak thread) ATTF giveaway Mini One gyro Tricopter build log James’ latest Radikal G20 video

InsideHeli #83 – Fun Fly and Mail Bag

Yes, we’re back! Home improvement projects and night classes conspire to delay the show. James and Chris read a listener email and discuss the questions. A new sponsor is introduced, Chris talks about the Ron Lund Fun Fly, and tells of his “miracle auto”. Tune in! Stuff We Talked About: HK600 heli Curtis Youngblood’s Autorotation Clinic Video (Helifreak.com membership required) 2010 Ron Lund Fun Fly Coverage (AllMyRC.com) 2010 Ron Lund Fun Fly Coverage (RonLund.com)

InsideHeli #82 – Gasser Tuning Tips

James and Chris talk with Bill Meador about gasser engine tuning and the Radikal. There’s also something from the mailbag, some product news and a few interesting videos. Tune in! Stuff We Talked About: ATTF Giveaway HK600 heli Nick Maxwell’s 129 mph Trex 700E (YouTube) Controlled Flight Video Challenge (HeliFreak.com thread) Next generation Century Swift Prototype Video 1 and Video 2 (YouTube)

InsideHeli #81 – Calling IRCHA Volunteers

James and Chris talk to Gus Petraits about a volunteer opportunity at IRCHA. They also get the low-down on how Gus makes his own night blades. Tune in! Stuff We Talked About: IRCHA Xero Gear lights RunRyder volunteer thread HeliFreak volunteer thread Gus’ Night Flying video

InsideHeli #80 – Dave and Kyle Dahl

James and Chris get the low-down on the VBar from Mikado-sponsored father-and-son team Dave and Kyle Dahl! There’s also something from the mailbag, and Chris is hopped up on cold medicine. Tune in!Stuff We Talked About:Understand Flybar Mixing (article)Understanding Model Helicopter Rotor Heads (article)Kyle’s Sponsors:Mikado HelicoptersThunder Power BatteriesKontronik Speed ControllersScorpion MotorsEdge Blades

InsideHeli #79 – Cold and Hot Weather Tips

James and Chris talk about flying in cold and hot weather. There’s also something from the mailbag, updates on the Radikal, and results of Chris’ keychain video camera purchase. Tune in!Stuff We Talked About:Colorado Rotor Heads Alan Szabo’s FBL 600 video (YouTube)Alan Szabo’s FBL 700 video (YouTube)Alan Szabo’s FBL 500 video (YouTube)The Teaser video (YouTube)Tiger onboard video (YouTube)Knight onboard video (YouTube)Keychain Camera eBay storeLogo Keychain Vid thread (Helifreak)
DATE: Sat, 19 Dec 2009

InsideHeli #78 – Guru-Z and Radikal Updates

James and Chris give updates on their latest projects: The new Guru-Z CP micro head, and the Century Radikal G20 gasser. James also talks about his A123 receiver pack charging widget. Tune in!Stuff We Talked About:Inverted Blade mSR video (YouTube)Kyle Stacy Boom Camera video (YouTube)James’ Radikal build photos (Picasa)SLK Electronics Dapter
DATE: Sun, 06 Dec 2009

InsideHeli #77 – Meet the Robertsons

Join James and Chris as they talk with Jim and Jamie Robertson, and find out the “secret of success” of this father-and-son team. Stuff We Talked About:Curtis Youngblood EnterprisesPowerHelis.comCY Rave ENV (production sample pics)Ace Helis Custom CanopiesGuruZ micro headGuruZ Xeon frameJamie flying the Total G / Trex 700 (YouTube)Check out the fast reversal move at 1:56 and again at 5:56. WOW!
DATE: Mon, 30 Nov 2009

InsideHeli #76 – Mail Call and New Toys

Join James and Chris as they dig into the mailbag and answer listener questions. Chris talks about the new micro heli head from GuruZ, and James gets jealous because Chris got to fly a Total G-equipped heli. Tune in!Stuff We Talked About:GuruZ websiteCY Rave ENV (new pics)TME Ultra-micro battery adapter
DATE: Mon, 16 Nov 2009

InsideHeli #75 – Nick Maxwell

Join James and Chris as they talk with Nick Maxwell! This was a fun interview, so don’t miss it.Stuff We Talked About:Curtis Youngblood EnterprisesPowerHelis.comCY RaveCY Rave ENV (production sample pics)TME Xtrema – new pricing!
DATE: Sun, 08 Nov 2009

InsideHeli #74 – A Chat With Aaron Shell

Join James and Chris as they talk with Aaron “aaronredbaron” Shell and find out what he’s been up to lately. Tune in!Stuff We Talked About:Castle ESC giveaway on CrackRoll.comBaron’s Hobbies websiteTime Lapse T-Rex build (YouTube video)Aaron’s excellent hat (YouTube video)Carangifoil (YouTube video)Carangifoil news article
DATE: Mon, 02 Nov 2009

InsideHeli #73 – Century Radikal G20 with Bill Meador

Join James and Chris as they talk with Century R&D guy Bill Meador and get the scoop on the new Century Radikal G20 gasser. This 600-660mm gasser heli is going to twist your crank! Tune in!Stuff We Talked About:Radikal G20 comparison pageTorpedo Tunable MufflerBH Hanson Model Products
DATE: Sun, 18 Oct 2009

InsideHeli #72 – Art from Skookum Robotics

Join James and Chris as they talk with Art from Skookum Robotics and get the scoop on the new 3-axis SK-720 flight stabilization system. There are some exciting features in this soon-to-be-released unit. Tune in!Stuff We Talked About:Skookum RoboticsDrag Race video (Chris’ 1st race event)Drag Race video (Chris’ 2nd race event)Drag Race video (in a HeliFreak post with info)
DATE: Mon, 12 Oct 2009

InsideHeli #71 – Head Hunter Hurricane Frame

Join James and Chris as they talk with Ben Warren. Ben has developed an aftermarket frame for the Gaui Hurricane 550, and his company is named Head Hunter Helis. Tune in!Stuff We Talked About:Chris’ NZ Vacation picturesHead Hunter Helis websiteThe Helifreak Head Hunter Build threadThe Big Balls Bearing Blocks and Easy Mesh Motor Mount threadThe overall frame design development threadThe general Gaui Hurricane 550 Forum
DATE: Sun, 04 Oct 2009

InsideHeli #70 New moves and Bobby Smith

Join Daniel from ZeroRC and James as they talk about learning new moves. Bobby Smith from RRE Models also joins them to talk about batteries, blades and flybarless systems.
DATE: Sun, 20 Sep 2009

InsideHeli 69 – mSR and Review

Join James and Chris as they talk about the Eflite Blade mSR, iCharger 208B review, new lipos from Bobby and more. Stuff We Talked About:Bert’s OS55 Video
DATE: Mon, 07 Sep 2009

InsideHeli #68 – Bert Kammerer

Join James and Chris as they talk with Bert Kammerer. Bert shares tuning tips for OS engines, and of course there is our usual heli banter. He’s also got a great website and his own “Ask the Pro” section at www.AllMYRC.com! Tune in!Stuff We Talked About:BertRC.comBert’s forum at AllMYRC.com
DATE: Wed, 02 Sep 2009

InsideHeli #67 – Jerome from KME Engines

Join James and Chris as they talk with Jerome from KME Engines. Learn about the design and features of the new Diamond .60 Pro, and find out why it’s hot. Also, they have an update from Andy and how he’s getting along with the GyroBot 900 you, the listeners, got for him as well as talk about the InsideHeli section at a new forum: www.AllMYRC.com! Tune in!Stuff We Talked About:KME EnginesInsideHeli forum at AllMYRC.com
DATE: Mon, 24 Aug 2009

InsideHeli #66 – IRCHA 2009 Event Coverage

Join James, Chris, and Daniel as they chat about IRCHA 2009. As you can tell from the links below, new flybarless (FBL) flight stabilization units were a hot topic. Tune in!Stuff We Talked About:IRCHA Official websiteCY Enterprises (Total G FBL – no info on site yet)Skookum Robotics (new 3-axis FBL – no info on site yet)CSRC (Rondo FBL)ReadyHeli (Mikado Mini VBar FBL)Inertia RC (Axiom FBL)ZeroRC.com (Daniel’s event pics)
DATE: Sun, 16 Aug 2009

InsideHeli #65 – Pre-IRCHA banter and other stuff

Join James and Chris as they follow up on last week’s PSC regarding the JR 8717 servos, and provide an update on the Kong Power battery tests. There’s also talk about the iCharger 208B, IRCHA, collective / energy management, great coffee, and funny video action. Tune in!Stuff We Talked About:Bob Hoover energy management video (YouTube)Hilarious “oopsie” video (YouTube)ReadyHeli Kong Power packsArizona Beans (buy your coffee!)HeliFreak thread about AZBeans
DATE: Tue, 04 Aug 2009

InsideHeli #64 – Power System Corner with Lucien Miller

Join James and Chris as they talk about the iCharger 208B, IRCHA, and crashes. We also have an installment of the Power System Corner with Lucien Miller from Innov8tive Designs. Tune in!Stuff We Talked About:Curtis Youngblood’s AMA Nats video (RunRyder)ProgressiveRC.comMatt Botos’ Logo 600 crash (YouTube)
DATE: Sun, 26 Jul 2009

InsideHeli #63 – Tom Talks Flying, plus a Giveaway

James and Chris chat with Tom Erb: RC heli instructor, competition flyer, and field rep for Futaba and Miniature Aircraft. Chris throws out an InsideHeli trivia question with RCStyx as the prize. Tune in!Stuff We Talked AboutFAI F3C WebsitePrecision Heli Aerobatics WebsiteRunRyder thread about precision aerobaticsFutabaMiniature Aircraft USAReadyHeliProgressiveRC
DATE: Sun, 19 Jul 2009

InsideHeli #62 – Jeremy ‘Lithiumstatic’ Harvey

James and Chris chat with Jeremy “Lithiumstatic” Harvey. If you don’t know who he is, we guarantee you’ll be inspired by his story. Tune in!Stuff We Talked AboutJeremyHarveyRC.comTexas Scottish Rite HospitalBergen HelicoptersOutrage Helicopters
DATE: Mon, 06 Jul 2009

InsideHeli #61 – Heli Blaze Fun Fly and Other Stuff

James and Chris chat about the Heli Blaze fun fly, James’ latest crash, and other assorted fun things. Tune in!Stuff We Talked AboutJames’ Knight flying video (YouTube)James’ Knight crash video (YouTube)Chris’ Fun Fly videos and picsHeliGeek’s Review of InsideHeliServo current draw data (RCG post)New E-Flite heli sneak peek (YouTube)
DATE: Sun, 28 Jun 2009

InsideHeli #60 – LAHeli Ricco SE Review

James and Chris finally get to the meat of the LAHeli Ricco SE review, and they chat about Chris’ flybarless Protos tuning. Tune in!Stuff We Talked AboutLAHeli Ricco ReviewTime Warp TV Show (forum to post request for RC heli show)G401B gyroG401B gyro discussion thread (RCGroups)
DATE: Sun, 21 Jun 2009

InsideHeli #59 – XFC Report

James and Chris are joined by “osterizer” Bill, and they chat about James and Bill’s trip to the XFC event. There is also talk about Bill’s Swift “SLT”, and Chris’ new Ricco (an upcoming InsideHeli review). Tune in!Stuff We Talked AboutXFC Coverage on RCGroupsXFC Coverage on RunRyderXFC Coverage on CrackrollSwift “SLT” pictures
DATE: Mon, 15 Jun 2009

InsideHeli #58 – A Chat With Aaron Shell

James and Chris get Aaron “aaronredbaron” Shell on the show to talk about (what else?) helicopters. Chris reveals another upcoming review, and finally has his own flybarless stabilization unit in-hand. Tune in!Stuff We Talked AboutLAHeli Ricco from ElektroRCJoe Nall Fly-inBaron’s HobbiesCrackRoll.comGotHeliRC.com (the other LAHeli dealer in the US)Jim’s (macr0t0r) comments on #58 (RCGroups post)
DATE: Sun, 31 May 2009

InsideHeli #57 – Swag winners and other fun stuff

James and Chris (with some help from Liz) draw winners for the InsideHeli swag. Chris chats about flying his mini Titan on 4S, and reveals that he has a flybarless unit on order. Tune in!Stuff We Talked AboutRCHeliWikiBargain CF tail bladesSkookum Robotics
DATE: Thu, 21 May 2009

InsideHeli #56 – Definitions and Maintenance

James and Chris discuss heli definitions, and chat about maintenance items too. Chris has more to say about flying his Knight 600E on 10S2P A123. Tune in!Stuff We Talked AboutKnight 600E on 10S2P A123 (HeliFreak thread)Heli Definitions (PDF file)
DATE: Sat, 09 May 2009

InsideHeli #55 – James goes Flybarless and Swift Misadventures

Finally, a new episode! James talks about his flybarless experiences with the Knight and Frenzy, and Chris tells all about his Swift incident. Tune in!Stuff We Talked AboutSkookum Robotics SK360Swift Crash (RCG post)Henseleit Helicopters (factory site)Henseleit Video 1 and Video 2
DATE: Fri, 24 Apr 2009

InsideHeli #54 – 450 Comparo and Frenzy Review Wrap-Up

Join James and Chris as they do a listener-requested comparison of four 450-class helis. James does the final wrap-up of the JS Models Frenzy review, and they give an update on last show’s fund raiser. Tune in!Stuff We Talked AboutJS Models TZ-V2 Frenzy Review (ATTF / IH Reviews Page)InsideHeliPodcast YouTube Channel Hobby-Lobby (Dragonus Distributor)A Main Hobbies (Thunder Tiger mini Titan)A Main Hobbies (T-Rex 450)Ron’s HeliProz South (Blade 400 / Parts)TME Ultra-Micro battery adapter
DATE: Sun, 12 Apr 2009

InsideHeli #53 – Review Wrap-Up, Fun Fly, and a Fund Raiser

Join James and Chris as they record a show from the same location for the first time! There is much chatter about the Austin Fun Fly, Chris does the final wrap-up of the Compass Knight 600E review, and they talk about a fund raiser for a good cause. Tune in!Stuff We Talked AboutCompass Knight 600E Review (ATTF / IH Reviews Blogpage)Austin Fun Fly Videos (Jeff’s YouTube Channel)Austin Fun Fly Pictures (Kevin’s Picasa Album)Ace Helis Custom Canopies (RunRyder Album)We hit our goal! We’ll be buying Andy a Gyrobot 900!!
DATE: Mon, 06 Apr 2009

InsideHeli #52 – Listener Mail Galore

Join James and Chris as they read several listener emails, including a follow-up from the AMA Park Pilot interview and a response from Dave Mathewson, AMA President. Also, more teasers about the two upcoming heli reviews Chris and James are preparing.Stuff We Talked AboutJS Models TZ-V2 “3D Frenzy” from Amain HobbiesCompass Knight 600E from KBDD, LLC, now distributed by CommonSense RC
DATE: Sun, 29 Mar 2009

InsideHeli #51: Two new reviews, and true obsession

Join James and Chris as they talk about two upcoming review models: the JS Models TZ-V2 Frenzy, and the Compass Knight 600E. Chris talks about his new mini Titan, Lucien Miller drops by for a Power System Corner, and they play a voicemail from a listener that you will need to hear to believe. Don’t miss it!Stuff We Talked AboutJS Models TZ-V2 “3D Frenzy” from Amain HobbiesCompass Knight 600E from KBDD, LLC, now distributed by CommonSense RCThunder Tiger miniTitan
DATE: Sun, 15 Mar 2009

InsideHeli #50 – AMA Park Pilot Program

Join James and Chris as they chat with Mark Smith from the Academy of Model Aeronautics about the relatively new Park Pilot Program. You’ll learn how the PPP is helping to bring new people into the hobby and keep them there. Great stuff!Stuff We Talked AboutAcademy of Model Aeronautics (AMA)Park Pilot Program
DATE: Sun, 08 Mar 2009

InsideHeli #49 – It’s all about A123 batteries!

Join James and Chris as they chat with Bill Sanford about his A123-powered Align (yes, Align!) helicopters. We talk about the pros and cons of A123 cells, how to charge them, and how Bill actually managed to kill a few of them.Stuff We Talked AboutBaldwin Controls Zip charge terminator Zip Charging Discussion (RCG thread)Tanic Packs Mastech HY5020 charge cordHyperion A123 battery connector barsBattery bar assembly tips (PDF file)Trex 600 / A123 Discussion (HeliFreak thread)
DATE: Mon, 02 Mar 2009

InsideHeli #48 – FAI – F3C flying and Power System Corner

Join James and Chris as they chat with Henrik Engert about the FAI / F3C style of helicopter flying, and what you need to do to get started in competition. We also have a Power System Corner segment with Lucien Miller of Innov8tive Designs. Tune in!Stuff We Talked AboutRCPrecisionHeli.com (FAI / F3C information site)Hashimoto flying F3C (YouTube)Wayne Mann F3C Schedule A (YouTube)Scott Gray F3C Schedule B (YouTube, narration by Curtis Youngblood)
DATE: Mon, 23 Feb 2009

InsideHeli #47 – Probar Flybarless System

Join James and Chris as they chat with Probar flybarless unit designer Carlo, and also Bobby Smith from RREModels who’s been flying it and helping Carlos tweak it. RREModels will also be selling the Probar when it hits the market.Stuff We Talked AboutAll of these flight videos feature the Probar unit:Carlo flying the Joker (YouTube)Chris Harmon flying the Trex 600n (YouTube)Carlo flying the Raptor (YouTube)Bobby Smith flying the Knight (.wmv file)
DATE: Sun, 15 Feb 2009

InsideHeli #46 – AMA Misconceptions & Other Stuff

Join James and Chris as they discuss listener emails, misconceptions about the AMA, and “keyboard experts”. WARNING! Soapboxes will be climbed upon in this episode.Stuff We Talked AboutT2o’s Kinetic 50eKnight 600eEly-Q VisionJS Models TZ-V2 Tiny Blade 400 video (YouTube or Vimeo)
DATE: Mon, 26 Jan 2009

InsideHeli #45 – Curtis Youngblood Interview

Join James and Chris as they chat with Curtis Youngblood about the Rave, the Solid-G, and other fun stuff. Don’t miss this one!Stuff We Talked AboutCurtis Youngblood EnterprisesPowerhelis.comRaveJR RadiosRadix “Cosmetic Flaw” BladesJustPlaneChris’ Blog James’ IL-2 Website
DATE: Sun, 18 Jan 2009

InsideHeli #44 – AMA Trade Show, servos, and other stuff

Join James and Chris as they chat with Lucien Miller about the AMA Trade Show held in Ontario California. Of course there’s also motor talk, servo chatter (heh) and general heli fun. Join us!Stuff We Talked AboutCrabfu’s video (YouTube)CenturyAlignMiniature AircraftScorpion Calc Software (ZIP file)Hyperion servos (Manufacturer site with data)A Main HobbiesBishop Power ProductsRC Supersales
DATE: Sun, 11 Jan 2009

InsideHeli #43 – Lipo Fire: A Listener’s Story

Join James and Chris as they chat with a listener about his recent experience with a lipo charging accident and fire. We also debut a new “flight challenge” segment. Don’t miss it! NOTE: If you’d like to make a small donation to help Mike replace his hobby stuff, here’s a donate button. Stuff We Talked AboutVideo of the Week (zip file)Lipo SackBattery Bunker
DATE: Sun, 21 Dec 2008

InsideHeli #42 – Holiday Wishes + Power System Corner

Join James and Chris as they talk about what they want for Christmas, and Lucien Miller from Innov8tiveDesigns.com drops by for a Power System Corner segment.Stuff We Talked AboutHitch Mount Cart Flybarless goodies Approach Engineering Cobra kit
DATE: Tue, 16 Dec 2008

InsideHeli #41 – Bobby Smith from RREModels.com

Join James and Chris as they chat with Bobby and Rosenda Smith of RREModels.com! Bobby tells us how he got started in the hobby, and gives us an inside look at the creation of RREModels and why it’s “An RC store from a pilot’s perspective.”Stuff We Talked About:Bobby’s Flybarless Knight video
DATE: Sun, 07 Dec 2008

InsideHeli #40 – Albert Tejera of TME

Join James and Chris as they chat with Albert Tejera of Tejera Microsystems Engineering about his Xtrema charger and other products. Also we read listener email, and subject our guest to questionable humor.Stuff We Talked About:The Xtrema Charger PageSimple Smoke PumpCHARGEMinderJim’s (macr0t0r) Show comments (RCG post)
DATE: Sun, 23 Nov 2008

InsideHeli #39 – Scorpion motor review & Power System Corner

Join James and Chris as they talk about the new Scorpion 3026-880 motor for the Protos, and we also have our first installment of the Power System Corner with Lucien Miller from Innov8tive Designs!Stuff We Talked About:Scorpion 3026-880Video of the Week (updated 08 Dec, original was no longer available)Data Charts (RCG Post)
DATE: Mon, 17 Nov 2008

InsideHeli #38 – Sticks and Rev Limiters

Join James and Chris for this rather short episode as they read listener email and discuss setting up a rev limiter on a nitro heli. Stuff We Talked About:Throttle Jockey RevMax (Manufacturer site)RevMax Setup Videos Video of the Week (YouTube)
DATE: Mon, 03 Nov 2008

InsideHeli #37 – Weather, Knights, and basic FF

Join James and Chris as they chat about the weather, and of course helicopters. Knight 3D talk abounds, as well as how to transition from hovering into basic forward flight.Stuff We Talked About:Compass Knight 3D (Manufacturer site)Chris’ Knight 3D video (Vimeo)PhoenixCreator (Phoenix downloads page)PhoenixCreator tutorial (translated via Google)Fuel Magnet
DATE: Tue, 21 Oct 2008

InsideHeli #36 – It’s all about the Protos!

Join James and Chris as they talk about Chris’ newest toy: The MSH Protos. Hear what the build was like, how it’s different from others in its class, and of course how it flies!Stuff We Talked About:MS Heli’s websiteElektroRC.comChris’ Protos vidsProtos build manual (PDF)
DATE: Thu, 09 Oct 2008

InsideHeli #35 – Kyle from RCSuperSales

Join James and Chris as they chat with Kyle from RCSuperSales about his shop and what it’s like to fly real helicopters. Stuff We Talked About:ARCA Heli Fly-in (RR thread with photos)Outrage G5
DATE: Mon, 06 Oct 2008

InsideHeli #34 – SRC Event & Hotrodding a Heli

Join James and Chris as they chat about the Southern Rotary Classic Fly-in and the pros and cons of stuffing a .50 into a .30 size heli. Stuff We Talked About:Outrage 550 NextD RaveSpektrum AR7100R*
DATE: Sun, 21 Sep 2008

InsideHeli #33 – Basic CCPM Setup

We’ve got a full house this episode! Join the James’ (Northern and Southern), Eeeeky, and Chris as they chat about CCPM setup basics. Also hear Eeeeky’s thoughts about IRCHA and the MSH Protos. Stuff We Talked About:Video of the WeekMS HeliEsprit ModelEeeeky’s Protos VidNewspaper article about EeeekyXFC Night Flying Videosmacr0t0r’s show commentsHeliFreak thread about the show and CCPM servo setup
DATE: Mon, 08 Sep 2008

InsideHeli #32 – Interview: Art from Skookum Robotics

Join James and Chris as we chat with Art from Skookum Robotics about their SK360 Digital Flybar system. If you’re interested in flybarless helis, you don’t want to miss this one!Mentions:Video of the Week Skookum RoboticsHeliDirectOutrage RC
DATE: Sun, 31 Aug 2008

InsideHeli #31 – Mikado Logo and Flybarless discussion

Join James and Chris as we chat with James “Jameotron” from New Zealand about Mikado Logo helis, and flybarless configurations.Mentions:Esprit ModelMikado HeliSkookum RoboticsRunRyder IRCHA videosHelicopter geekMacr0t0r recap notes for Ep#31
DATE: Thu, 14 Aug 2008

InsideHeli #30 – A123s and Aerobatic Setups

Join James and Chris for a primer on A123 batteries, and how to get started in basic aerobatics.Mentions:A123 SystemsBP HobbiesTanic Packs
DATE: Sun, 10 Aug 2008

InsideHeli #29 – This and That

Join James and Chris as we tell our listeners why there’s no interview for this show. Oh, and hear about the dumb thing Chris did!Mentions: Curtis Youngblood EnterprisesGohbee AviationE-Flite
DATE: Mon, 04 Aug 2008

InsideHeli #28 – Charley Stephens: Outrage RC

Join James and Chris as we interview Charley Stephens from Outrage RC. Charley is the man behind the Rotorworkz frames and the new Outrage G5 helicopter. Charley talks about the genesis of the Outrage, and also hints at what’s coming soon. Don’t miss it!Mentions:Outrage RCRotorworkzG5 Video
DATE: Mon, 21 Jul 2008

InsideHeli #27 – Going Nitro? What you’ll need!

Join James and Chris as they discuss the pros and cons of glow vs electric helis, and what you need to consider before taking the plunge into the nitro-powered world.Mentions:Chris’ Swift videoJim’s (macr0t0r) Show comments (RCGroups.com post)
DATE: Sun, 13 Jul 2008

InsideHeli #26 – Dave Herbert Part 2

Join James and Chris as we interview Dave Herbert, One of the pioneers of early helicopters and all around great guy. Hear about the early days of RC helis, and some of Dave’s tips on successful flying. This is part two of the interview, the first part is in InsideHeli #25.Mentions:Dave’s YouTube videosMacr0t0r recap notes for IH Ep#26
DATE: Tue, 01 Jul 2008

InsideHeli #25 – Dave Herbert Part 1

Join James and Chris as we interview Dave Herbert, One of the pioneers of early helicopters and all around great guy. Hear about the early days of RC helis, and some of Dave’s tips on successful flying. This is part one of the interview, the conclusion will be posted next week.Mentions:Dave’s YouTube videosMacr0t0r recap notes for IH Ep#25
DATE: Mon, 30 Jun 2008

InsideHeli #24 – Lucien Miller Interview

Join James and Chris as we interview Lucien Miller from Innov8tiveDesigns.com, US distributor for the Scorpion product line. Hear about the Scorpion motor construction, and details from Lucien’s recent visit to the factory. A long show, but well worth it!Mentions:Pictures from Lucien’s factory visitLucien’s F-4 build threadVideo of the Week (YouTube)Macr0t0r recap notes for Ep#24
DATE: Mon, 16 Jun 2008

InsideHeli #23 – Pitch curves and Autorotation

Join James and Chris for a follow-up on the GY611 gyro setup from last week. They also discuss the uniflow fuel system, pitch curves, throttle curves, and how to prepare for and practice autorotations. Be sure to check out the video of the week too!Mentions:Video of the Week (YouTube)GY611 setup details (RCG forum post)Uniflow fuel system informationAutorotation setup and tipsAutorotation spot landingsMacr0t0r recap notes for Ep#23
DATE: Sun, 08 Jun 2008

InsideHeli #22 – Interview with Eeeeky

Join James and Chris for a “show of the Century” as we interview Century and Gazaur factory rep Aeryk “Eeeeky” Hurley and hear about his helis. We also get Eeeeky to talk about Futaba 601/611 gyro setup, the Blade 400, and other interesting stuff. If you’ve ever wondered how Eeeeky got his nickname, don’t miss this show.Mentions:Century SwiftCentury Hawk ProCentury PredatorGazaur MarsEeeeky’s Predator FreestyleEeeeky’s videos
DATE: Mon, 02 Jun 2008

InsideHeli #21 – Interview with macr0t0r

James and Chris interview Jim “macr0t0r” and discuss the merits of coaxial vs single rotor, inverted flight training gear, and other fun stuff. NOTE: Lucien from Innov8tive Designs had to cancel, but he’ll be with us when he returns from a visit to the Scorpion factory in China.Mentions:Direct Drive motor tail with pitch control (RCG Thread)Inverted training gear (RCG Thread)Chris’ CP2 Crash Video (YouTube)
DATE: Sun, 01 Jun 2008

InsideHeli #20 – Choosing a motor

Chris and James talk about the things you need to know in order to choose the right motor for your electric heli.Mentions:Video of the Week: YouTubePentium ESCs at Don’s RCJETI Spin 33 at Hobby-LobbyCastle’s new HV 30 ESCScorpion ESCs at Innov8tive DesignsEHBG (Electric Helicopter Beginner’s Guide)MSH Protos: Manufacturer site and RC Groups build threadRave 3D: Manufacturer site and RunRyder discussion threadOutrage G5: Manufacturer site and HeliFreak discussion forum
DATE: Sun, 11 May 2008

InsideHeli #19 – Training Tips & Tricks

Chris and James share a listener’s tips and tricks on effective training, and James talks more about the Blade 400. Don’t miss the video of the week! Mentions:Video of the Week: YouTube or HeliFreak High QualityBlade 400Phoenix Sim Clearview Sim HeliSimRC Sim RealFlight Sim
DATE: Sun, 04 May 2008

InsideHeli #18 – InsideHeli Returns!

Join Chris and new host James for the return of InsideHeli! Mentions:Rave 3DBlade 400DragonusWelcome James (Sparx) to the team!
DATE: Sun, 27 Apr 2008

InsideHeli #17 – Transition

Things change, yet stay the same. We have grown and decided to hit the whole RC market (well, the ones that fly that is). Welcome to AllThingsThatFly. We also welcome DiggyDiggs. This show is random banter , however this is a transition show with some of a taste of future shows as far as hosts and personalities.We hope you like the new format. We enjoy flying many things and we know you do to. We will be getting back to a regular format show now with email, interviews, tips and tricks – etc.The RSS feed should not change. The older site addresses work just the same. It’s still us. The new email is contact@allthingsthatfly.comStay tuned for much more.Enjoy.~
DATE: Wed, 05 Sep 2007

InsideHeli #16 – The Negative, The Positive

Join Jamie and Chris as they talk about receivers, and what “negative shift” and “positive shift” means to you. And of course, there is the usual listener email and banter about the week’s adventures. We’re “positive” you’ll enjoy this episode. Sites mentioned:Castle CreationsLightFlightrc.comBergs RX’s really that much better? (RCGroups.com discussion thread)Pictures from Chris’ flying adventures (RCGroups.com discussion thread)Audio errors:Jamie said “stay away from the MicroStamp” – What he meant was “stay away from the Feather”.Chris mentions a “left pirouette when moving from left to right” and it should be a “right pirouette”.
DATE: Thu, 23 Aug 2007

InsideHeli #15 – Heli Banter

Catch up with Chris and Jamie as they talk about their latest adventures and mis-adventures.Lama UpgradesHoneyBee FP upgradesBatteries and chargingLipo’s and “non-lipos?”Don’t miss it!
DATE: Fri, 10 Aug 2007

InsideHeli #14 – Tools & Upgrades With Macr0tor

This week we chat with Jim, aka “macr0t0r” from RCG about some of his favorite heli tools, and what upgrades worked (or didn’t work!) for his micro and mini helis. It’s mostly just banter, but there are a few juicy tidbits of info if you listen close, so turn it up and tune it in.
DATE: Fri, 03 Aug 2007

InsideHeli #13 – HDX500

This week we chat with Nick Jones from HeliDirect about the new HDX500 heli. Looks like an exciting new heli, in a great “mid-size” platform.Links mentioned in the show:HDX500 build thread #1HDX500 build thread #2SCHC thread
DATE: Thu, 26 Jul 2007

InsideHeli #12 – Training

This week Jamie and Chris talk about simulators, and share thoughts on basic trainer helicopters. If you’re wondering whether to get a sim, or how to set up your mini heli to be a bit more tame for training, listen in!Sims:MAC:RC Helicopter Simulator FreePC:FMS FreeRealFlight G3 $230.00AeroFly Pro $170.00Phoenix RC $200.00Clearview $30.00
DATE: Tue, 17 Jul 2007

Inside Heli #11 – King me

King II! Join us in discussions about the very popular King II, as well as the King I. Setups, recommendations, history, experiences and upgrades. All King talk! Sorry for the audio quality – we are working on it. 🙂 King II Thread 1King II Thread 2
DATE: Mon, 09 Jul 2007

InsideHeli #10 – Compy

We are back and have a great interview for episode #10! Ken from the J-Team talks to us about the Compy300 heli. Discussion about current and future Compy designs. Ken even talks about “his” ideal setup on his Compy. Listener email, micro size heli’s and stickers on dogs!Don’t miss it~Compy threadCompy FP thread Ok, we did get permission to post the swash design.
DATE: Thu, 28 Jun 2007

InsideHeli #9 – Announcements

This week Jamie and Chris talk about the basics of forward flight, and how to ease into it from tail-in hovering without disastrous results. They also speak with “Red” and “Diggs” about the upcoming InsidePlane podcast. Tune in!Sites mentioned this week:Molts ModelsInsidePlane.com
DATE: Sun, 24 Jun 2007

Inside Heli #8 – Motors

Chris attempts to explain motors to Jamie! Tune in and learn a bit about choosing a motor and pinion – and what that means.Listener email and follow up on the Airwolf from Episode #7.Link to Dark Horse’s Helicopter Power & Setup CalculatorLink to Honey Bee Wiki (includes RealFlight G3.5 model)Short video of Chris’ T-Rex with the ARC 28mm motor mentioned in EP8:http://www.youtube.com/watch?v=Oh9Rvpl7Eoc
DATE: Thu, 14 Jun 2007

InsideHeli Episode #7 – Airwolf

In Episode 7 we chat with Kelly, aka: “Quiet Riot” in the forums about his scale T-Rex 600-based Airwolf heli. If you’re interested in scale flying, you will want to listen in!Scroll down for the pictures and video!
DATE: Thu, 07 Jun 2007

Inside Heli #6 – Finless Bob Interview

In this episode we talk to Bob White, better known as “Finless” in the Helifreak.com forum. Bob has created some of the best helicopter setup videos you’ll find, and is quite the character too. Tune in!Video of shaft straightening tool mentioned in the podcast
DATE: Tue, 29 May 2007

InsideHeli #5 – HeliDirect Interview

In episode #5 we talk to Larry Haley, aka “Rare Bear” and hear the inspiring story of how he overcame physical difficulties to fly helis, and ultimate landed a job at HeliDirect. Of course, there’s the usual listener email too. Tune in!
DATE: Tue, 22 May 2007

Inside Heli #4 – ToolKit

In this episode, Jamie and Chris talk about their workshops, and what tools and equipment they find useful in their pursuit of heli-nirvana. It’s an excuse to go tool shopping! Listener email has questions about the HDX300 belt conversion, the Freestyle belt conversion (from Episode 3) and the Compy 300.Here are the build logs for each type of belt tail conversion:Compy FPFreeStyle Belt conversionHDX300 Belt conversionCompy 300 (CP)
DATE: Tue, 15 May 2007

Inside Heli #3 – Freestyle

In episode #3 we go “freestyle” and discuss the Freestyle-Hobby Belt Conversion kit for micro helis. Visit their site. General freestyle banter, heli talk, and fun. More lister e-mail and answers. Tune in!
DATE: Tue, 08 May 2007

Inside Heli #2 – Heli 101

In episode #2, we discuss some of the most commonly asked questions about getting started in the RC helicopter hobby. We all had to start somewhere, and having a good foundation of what is recommended for your first or second heli is what most of us need. We’ll also talk about some of the oft-used acronyms like “CP”, “FP”, “CCPM” and what they actually mean. Tune in!Sites we mentioned:EHBGRADDSBy popular demand, a link to the “spectactular CP2 crash” mentioned:Crash Video
DATE: Wed, 02 May 2007

Inside Heli #1 – Lipos

Burke and Chris talk to one of the industry leaders in Lipo batteries. CommonSenseRC speaker Mike Kommel answers our questions and gives us insight on the latest battery technology, as well as tips for some of us new guys. 😉
Recent Comments for Inside Heli Podcast

Rücken-Nasenschweben

Monday, July 5th, 2010

Nach langer Sim-Pause(Wetter ist zu gut) flog ich gestern mal wieder eine Stunde am Simulator: Langsame Rücken-Rundflüge.
Heute habe ich dann in echt mit dem T-Rex 250 Rücken-Nasenschweben geübt. Halber Loop oder halber Backflip und dann schweben. Für’s erste Mal klappte es schon recht gut. “Roll immer dahin steuern wohin er wegkippt oder driftet” war der Merksatz – genau wie beim “normalen” Nasenschweben. Und es war ähnlich wie bei meinen ersten Rücken-Heckschwebe Versuchen: Der Heli ist immer von mir weg gedriftet – das war heute auch die Windrichtung. Bei dem kleinen Heli schon gefährlich – ein paar Mal habe ich die Lage erraten, aber nicht erkannt.
Der Ausstieg war immer 2te Hälfte vom Loop oder Flip – was den Nachteil hat, dass der dann mit Schwung noch weiter von mir wegfliegt.

Blade 400: Der erste Flug mit Blattschmied Blättern – viel zu träge! Selbst für F3C Schwebefiguren ungeeignet, weil ich nicht schnell & direkt korrigieren konnte. Mit den billigen “PRO 3D” Blättern von “thankforbuy” hatte ich heute viel mehr Spaß! thankforblades ! 😉 Ich werde noch mehr davon bestellen.
CY Radix Blades wiegen auch 22g / Stück !

Heute das erste Mal mit dem Blade einen Rückwärtslooping geflogen. Rückwärts auf mich zu bzw. etwas links neben mir. Das sah eigentlich besser aus als dieser Korkenzieher-Rückwärts Loop den ich vor einiger Zeit mit dem T-Rex 250 flog.

Danach flog ich die F3C Figur “M” mit 7 halben Pirouetten. Sah schon zimlich gut aus. Vermutlich hatte ich Glück und es wehte gerade kaum Wind.

Leider ist mir bei einer Landung der Heckrotor in steinigen Boden eingedrungen. Jetzt haben die Heckblätter noch mehr und noch größere Macken. Schade. Das war nicht nötig.

Ein paar Minuten durfte ich auch einen BladeSR fliegen. Niedlich, der Kleine. Am coolsten finde ich wie er mit gaaanz wenig Drehzahl flach schräg nach unten gleitet. Vielleicht stelle ich bei meinen Helis auch vorübergehend mal so eine Pitch & Gaskurve ein: Pitch von 0 bis n°, Gas von 0 bis 70% oder 80%

TDR: crash

Sunday, July 4th, 2010

Gestern kam ich nicht zum fliegen, abgesehen von ein paar Runden mit T-Rex 250 und Piccolo im Wohnzimmer. Drinnen und draussen war es sehr heiss, ca 32°C. Hab überlegt, wo ich im Schatten fliegen könnte und dachte an die Rundhalle – die war aber leider geschlossen 🙁 Also weiter zum Platz. Dort durfte ich eine TDR mit AC3X fliegen und dann auch crashen sehen. Spektakulär! Pilot versteuert sich beim Aussen-Looping, dreht ihn knapp über’m Boden wieder gerade, tickt dann recht heftig mit Kufen & Heck am Boden auf – steigt wieder, aber Heck funktioniert nicht mehr (die Anlenkung war von der Kugel gesprungen!) Autorotation ? Nicht versucht oder nicht gelungen. Jedenfalls knallt der Heli etwas schräg und kaum gebremst auf den Rasen. Offensichtliche Schäden: beide Blätter, Blattlagerwelle, eine Landekufe, Haube. Ein Akku-Pack ist verformt.